Linux auf dem XPS 420

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Linux auf dem XPS 420

      Hallöchen,

      ich möchte mir demnächst einen XPS 420 kaufen. Weil ich aber (außer zum Spielen) hauptsächlich Linux benutze, würde ich mich freuen, wenn jemand dazu Anmerkungen hätte.

      Achja: Super-hilfreich wären, falls es jemand machen könnte, die Ausgaben folgender Befehle:

      lspci
      lsusb
      dmesg

      Danke schon mal im Voraus!
      Max

    • Halli Hallo!

      Auf meinem XP-420 (Q6600, 8800 GTX, 3 GB RAM, 2x 320 GB Festplatte, Creative X-Fi Gamer) läuft Debian (Kanotix 2007-RC7 Thorhammer). Ich bin zufrieden, weils gut läuft. Da ich da wo der XPS-420 steht, habe ich momentan kein I-Net, kann dir deshalb die angeforderten Ausgaben nicht zukommen lassen, kann ich aber machen wenn ich wieder DSL habe.

      Einziges Manko, was ich derzeit ausmachen kann: Die Creative X-Fi Gamer funktioniert unter Linux nicht, weils es keine 32-Bit Linux Treiber dafür gibt. Wenn du ein 64-Bit System aufsetzt, könnte es funktionieren, weil es 64-Bit Treiber bei Creative gibt. Hürde könnte noch sein, dass die Dell-Creative X-Fi Gamer ein bißchen verändert wurde im vergleich zu einer "freien" Creative X-Fi Gamer. So funktionieren unter Windows nur die Dell-Creative Treiber, die von der Creative-Site gezogenen Windows-Treiber funktionieren nicht. Unter Linux könnten die gleichen Probleme drohen.

      Zum Glück gibts aber den OnBoard-Sound-Chip, der funktioniert unter Linux bestens. Also habe ich unter Linux OnBoard-Sound (gar nicht so schlecht finde ich) und unter Windows zum Spielen benutze ich den wirklich hammermäßigen Creative X-Fi Gamer Sound...

      Viele Grüße

      gsfx
      Nothing moves you like a Citroen.

    • Hi gsfx,

      Original von gsfx
      Da ich da wo der XPS-420 steht, habe ich momentan kein I-Net, kann dir deshalb die angeforderten Ausgaben nicht zukommen lassen, kann ich aber machen wenn ich wieder DSL habe.

      Das wäre super!

      Einziges Manko, was ich derzeit ausmachen kann: Die Creative X-Fi Gamer funktioniert unter Linux nicht, weils es keine 32-Bit Linux Treiber dafür gibt. Wenn du ein 64-Bit System aufsetzt, könnte es funktionieren, weil es 64-Bit Treiber bei Creative gibt.

      Habe mir den Treiber gerade angeschaut. Scheint zwar diverse BLOBs einzubinden, aber immerhin ist er als Quelle verfügbar. Ich benutze nämlich ein 32-Bit-Gentoo Linux, aber einen 64-Bit-Kernel; ein fertiges Modul für z.B. SUSE hätte mir da nicht so viel genutzt. Ob die Karte im XPS damit funktioniert oder nicht, wird sich zeigen...

      Zum Glück gibts aber den OnBoard-Sound-Chip, der funktioniert unter Linux bestens. Also habe ich unter Linux OnBoard-Sound (gar nicht so schlecht finde ich) und unter Windows zum Spielen benutze ich den wirklich hammermäßigen Creative X-Fi Gamer Sound...

      So werde ich es im Notfall auch halten ;)

      Eine Frage noch: Welcher Netzwerkchip wird verwendet? Intel e1000 oder doch irgendwelches Marvell-Zeug?

      Grüße
      Max

    • Wie Linux bei RAID 0

      @gsfx:

      Hallo, ich höre Du hast Linux auf dem Rechner, bei gleicher RAID-Konfiguration.
      Ich hoffe, Du kannst mir helfen.

      Ich möchte neben Vista noch Linux Mint 4 laufen lassen. Blöderweise erkennt die Linux-Instalation RAID ja nicht.
      Lösung: DMRAID von der LIVECD laden. Hab ich alles gemacht und klappt auch. Aber danach muss man ja die SWAP und das ROOT Partition zuweisen. Ich habe zwei 30 GB Partitionen auf der Raid 0 Platte dafür erstellt.
      Dateistruktur bei habe ich jeweils auf SWAP und EXT3 (bei ROOT) gestellt. Sprungpunkt bei ROOT ist "/".

      Wenn ich jetzt installieren will, bricht er bei der Formatierung der Partitionen ab.

      Die Windows-Partitionen setze ich auf "not used" oder lasse sie, funktioniert bei beidem nicht. Kannst Du mir weiterhelfen? Wie hast Du Linux draufgekriegt? Hast Du Vista evtl. gelöscht (würde bei Deiner Grafikkarte (Gamer) kaum Sinn machen).

      Vieleicht kannst Du mir den entscheidenden Tipp oder ne Minianleitung geben.
      Vielen Dank schonmal vorab.

    • Hallo,

      Endlich wieder im Netz. Zwar nur DSL light, aber es ist erstaunlich flott.

      Zum Thema RAID: Mein XPS-420 ist entRAIDet worden. Die Platten laufen normal ohne RAID. Ich mag kein RAID.

      Quellcode

      1. abc@def:~$ lspci
      2. 00:00.0 Host bridge: Intel Corporation 82X38 Express DRAM Controller
      3. 00:01.0 PCI bridge: Intel Corporation 82X38 Express Host-Primary PCI Express Bridge
      4. 00:06.0 PCI bridge: Intel Corporation 82X38 Express Host-Secondary PCI Express Bridge
      5. 00:19.0 Ethernet controller: Intel Corporation 82801I (ICH9 Family) Gigabit Ethernet Controller (rev 02)
      6. 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
      7. 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
      8. 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
      9. 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
      10. 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
      11. 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
      12. 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
      13. 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
      14. 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
      15. 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
      16. 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
      17. 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
      18. 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
      19. 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
      20. 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
      21. 01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTX] (rev a2)
      22. 04:04.0 Audio device: Creative Labs SB X-Fi
      23. 04:05.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
      24. 04:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
      Alles anzeigen


      Quellcode

      1. abc@def:~$ lsusb
      2. Bus 004 Device 004: ID 046d:c718 Logitech, Inc.
      3. Bus 004 Device 005: ID 046d:c719 Logitech, Inc.
      4. Bus 004 Device 003: ID 413c:8130 Dell Computer Corp.
      5. Bus 004 Device 002: ID 046d:0b05 Logitech, Inc.
      6. Bus 004 Device 001: ID 0000:0000
      7. Bus 002 Device 001: ID 0000:0000
      8. Bus 008 Device 003: ID 0644:0201 TEAC Corp.
      9. Bus 008 Device 001: ID 0000:0000
      10. Bus 007 Device 004: ID beef:0006
      11. Bus 007 Device 001: ID 0000:0000
      12. Bus 006 Device 002: ID 06bd:20fd AGFA-Gevaert NV SnapScan e52
      13. Bus 006 Device 001: ID 0000:0000
      14. Bus 005 Device 001: ID 0000:0000
      15. Bus 003 Device 001: ID 0000:0000
      16. Bus 001 Device 005: ID 413c:2010 Dell Computer Corp.
      17. Bus 001 Device 004: ID 046d:c048 Logitech, Inc.
      18. Bus 001 Device 003: ID 413c:1003 Dell Computer Corp.
      19. Bus 001 Device 001: ID 0000:0000
      Alles anzeigen


      Desmesg in den nächsten Nachrichten...

      Gruß

      gsfx
      Nothing moves you like a Citroen.

    • Quellcode

      1. abc@def:~$ dmesg
      2. [ 0.000000] Linux version 2.6.24-3-kanotix (pbuilder@Kanotix) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Dec 31 17:27:37 UTC 2007 (Ubuntu 2.6.24-3.5-generic)
      3. [ 0.000000] BIOS-provided physical RAM map:
      4. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
      5. [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
      6. [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe53c00 (usable)
      7. [ 0.000000] BIOS-e820: 00000000bfe53c00 - 00000000bfe55c00 (ACPI NVS)
      8. [ 0.000000] BIOS-e820: 00000000bfe55c00 - 00000000bfe57c00 (ACPI data)
      9. [ 0.000000] BIOS-e820: 00000000bfe57c00 - 00000000c0000000 (reserved)
      10. [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
      11. [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
      12. [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
      13. [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
      14. [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
      15. [ 0.000000] 2174MB HIGHMEM available.
      16. [ 0.000000] 896MB LOWMEM available.
      17. [ 0.000000] found SMP MP-table at 000fe710
      18. [ 0.000000] Entering add_active_range(0, 0, 786003) 0 entries of 256 used
      19. [ 0.000000] Zone PFN ranges:
      20. [ 0.000000] DMA 0 -> 4096
      21. [ 0.000000] Normal 4096 -> 229376
      22. [ 0.000000] HighMem 229376 -> 786003
      23. [ 0.000000] Movable zone start PFN for each node
      24. [ 0.000000] early_node_map[1] active PFN ranges
      25. [ 0.000000] 0: 0 -> 786003
      26. [ 0.000000] On node 0 totalpages: 786003
      27. [ 0.000000] DMA zone: 32 pages used for memmap
      28. [ 0.000000] DMA zone: 0 pages reserved
      29. [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
      30. [ 0.000000] Normal zone: 1760 pages used for memmap
      31. [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
      32. [ 0.000000] HighMem zone: 4348 pages used for memmap
      33. [ 0.000000] HighMem zone: 552279 pages, LIFO batch:31
      34. [ 0.000000] Movable zone: 0 pages used for memmap
      35. [ 0.000000] DMI 2.5 present.
      36. [ 0.000000] ACPI: RSDP signature @ 0xC00FEBF0 checksum 0
      37. [ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
      38. [ 0.000000] ACPI: XSDT 000FD0A0, 0064 (r1 DELL B9K 15 ASL 61)
      39. [ 0.000000] ACPI: FACP 000FD1C0, 00F4 (r3 DELL B9K 15 ASL 61)
      40. [ 0.000000] ACPI: DSDT FFF5AE62, 2CBC (r1 DELL dt_ex 1000 INTL 20050624)
      41. [ 0.000000] ACPI: FACS BFE53C00, 0040
      42. [ 0.000000] ACPI: SSDT FFF5DC3F, 00AC (r1 DELL st_ex 1000 INTL 20050624)
      43. [ 0.000000] ACPI: APIC 000FD2B4, 0092 (r1 DELL B9K 15 ASL 61)
      44. [ 0.000000] ACPI: BOOT 000FD346, 0028 (r1 DELL B9K 15 ASL 61)
      45. [ 0.000000] ACPI: MCFG 000FD36E, 003E (r1 DELL B9K 15 ASL 61)
      46. [ 0.000000] ACPI: HPET 000FD3AC, 0038 (r1 DELL B9K 15 ASL 61)
      47. [ 0.000000] ACPI: DUMY BFE55C00, 0024 (r1 DELL B9K 15 ASL 61)
      48. [ 0.000000] ACPI: SLIC 000FD3E4, 0176 (r1 DELL B9K 15 ASL 61)
      49. [ 0.000000] ACPI: PM-Timer IO Port: 0x808
      50. [ 0.000000] ACPI: Local APIC address 0xfee00000
      51. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
      52. [ 0.000000] Processor #0 6:15 APIC version 20
      53. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
      54. [ 0.000000] Processor #1 6:15 APIC version 20
      55. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
      56. [ 0.000000] Processor #2 6:15 APIC version 20
      57. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
      58. [ 0.000000] Processor #3 6:15 APIC version 20
      59. [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
      60. [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
      61. [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
      62. [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
      63. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
      64. [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
      65. [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
      66. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
      67. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
      68. [ 0.000000] ACPI: IRQ0 used by override.
      69. [ 0.000000] ACPI: IRQ2 used by override.
      70. [ 0.000000] ACPI: IRQ9 used by override.
      71. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
      72. [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
      73. [ 0.000000] Using ACPI (MADT) for SMP configuration information
      74. [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
      75. [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000f0000
      76. [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
      77. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779863
      78. [ 0.000000] Kernel command line: root=UUID=af53ba66-fe53-487d-9e87-2c175cd896bc ro splash vga=791 quiet
      79. [ 0.000000] mapped APIC to ffffb000 (fee00000)
      80. [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
      81. [ 0.000000] Enabling fast FPU save and restore... done.
      82. [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
      83. [ 0.000000] Initializing CPU#0
      84. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
      85. [ 0.000000] Detected 2394.019 MHz processor.
      Alles anzeigen
      Nothing moves you like a Citroen.

    • Quellcode

      1. [ 17.279469] Console: colour dummy device 80x25
      2. [ 17.279472] console [tty0] enabled
      3. [ 17.279692] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
      4. [ 17.279963] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
      5. [ 17.389624] Memory: 3106484k/3144012k available (2624k kernel code, 36320k reserved, 1259k data, 380k init, 2226508k highmem)
      6. [ 17.389629] virtual kernel memory layout:
      7. [ 17.389630] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
      8. [ 17.389630] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
      9. [ 17.389631] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
      10. [ 17.389632] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
      11. [ 17.389632] .init : 0xc04d2000 - 0xc0531000 ( 380 kB)
      12. [ 17.389633] .data : 0xc03900cc - 0xc04cad84 (1259 kB)
      13. [ 17.389634] .text : 0xc0100000 - 0xc03900cc (2624 kB)
      14. [ 17.389636] Checking if this processor honours the WP bit even in supervisor mode... Ok.
      15. [ 17.389668] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
      16. [ 17.389775] hpet clockevent registered
      17. [ 17.469641] Calibrating delay using timer specific routine.. 4791.50 BogoMIPS (lpj=9583000)
      18. [ 17.469659] Security Framework initialized
      19. [ 17.469665] SELinux: Disabled at boot.
      20. [ 17.469667] Capability LSM initialized
      21. [ 17.469677] Mount-cache hash table entries: 512
      22. [ 17.469778] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
      23. [ 17.469785] monitor/mwait feature present.
      24. [ 17.469786] using mwait in idle threads.
      25. [ 17.469788] CPU: L1 I cache: 32K, L1 D cache: 32K
      26. [ 17.469790] CPU: L2 cache: 4096K
      27. [ 17.469792] CPU: Physical Processor ID: 0
      28. [ 17.469793] CPU: Processor Core ID: 0
      29. [ 17.469794] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
      30. [ 17.469801] Compat vDSO mapped to ffffe000.
      31. [ 17.469810] Checking 'hlt' instruction... OK.
      32. [ 17.485962] SMP alternatives: switching to UP code
      33. [ 17.487268] Early unpacking initramfs... done
      34. [ 17.665815] ACPI: Core revision 20070126
      35. [ 17.713751] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
      36. [ 17.803376] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
      37. [ 17.803388] SMP alternatives: switching to SMP code
      38. [ 17.803949] Booting processor 1/1 eip 3000
      39. [ 17.814289] Initializing CPU#1
      40. [ 17.892901] Calibrating delay using timer specific routine.. 4787.98 BogoMIPS (lpj=9575965)
      41. [ 17.892907] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
      42. [ 17.892910] monitor/mwait feature present.
      43. [ 17.892912] CPU: L1 I cache: 32K, L1 D cache: 32K
      44. [ 17.892914] CPU: L2 cache: 4096K
      45. [ 17.892915] CPU: Physical Processor ID: 0
      46. [ 17.892916] CPU: Processor Core ID: 1
      47. [ 17.892917] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
      48. [ 17.893489] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
      49. [ 17.893510] SMP alternatives: switching to SMP code
      50. [ 17.894123] Booting processor 2/2 eip 3000
      51. [ 17.904379] Initializing CPU#2
      52. [ 17.984741] Calibrating delay using timer specific routine.. 4788.00 BogoMIPS (lpj=9576009)
      53. [ 17.984747] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
      54. [ 17.984750] monitor/mwait feature present.
      55. [ 17.984752] CPU: L1 I cache: 32K, L1 D cache: 32K
      56. [ 17.984753] CPU: L2 cache: 4096K
      57. [ 17.984755] CPU: Physical Processor ID: 0
      58. [ 17.984756] CPU: Processor Core ID: 2
      59. [ 17.984757] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
      60. [ 17.985347] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
      61. [ 17.985356] SMP alternatives: switching to SMP code
      62. [ 17.985738] Booting processor 3/3 eip 3000
      63. [ 17.995993] Initializing CPU#3
      Alles anzeigen
      Nothing moves you like a Citroen.

    • Quellcode

      1. [ 18.072588] Calibrating delay using timer specific routine.. 4788.01 BogoMIPS (lpj=9576023)
      2. [ 18.072593] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
      3. [ 18.072597] monitor/mwait feature present.
      4. [ 18.072599] CPU: L1 I cache: 32K, L1 D cache: 32K
      5. [ 18.072600] CPU: L2 cache: 4096K
      6. [ 18.072602] CPU: Physical Processor ID: 0
      7. [ 18.072603] CPU: Processor Core ID: 3
      8. [ 18.072604] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
      9. [ 18.073193] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
      10. [ 18.073209] Total of 4 processors activated (19155.49 BogoMIPS).
      11. [ 18.073351] ENABLING IO-APIC IRQs
      12. [ 18.073515] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
      13. [ 18.220400] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
      14. [ 18.240399] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
      15. [ 18.260407] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
      16. [ 18.280388] Brought up 4 CPUs
      17. [ 18.280424] CPU0 attaching sched-domain:
      18. [ 18.280425] domain 0: span 03
      19. [ 18.280427] groups: 01 02
      20. [ 18.280429] domain 1: span 0f
      21. [ 18.280430] groups: 03 0c
      22. [ 18.280432] CPU1 attaching sched-domain:
      23. [ 18.280433] domain 0: span 03
      24. [ 18.280434] groups: 02 01
      25. [ 18.280436] domain 1: span 0f
      26. [ 18.280437] groups: 03 0c
      27. [ 18.280439] CPU2 attaching sched-domain:
      28. [ 18.280440] domain 0: span 0c
      29. [ 18.280441] groups: 04 08
      30. [ 18.280442] domain 1: span 0f
      31. [ 18.280443] groups: 0c 03
      32. [ 18.280445] CPU3 attaching sched-domain:
      33. [ 18.280446] domain 0: span 0c
      34. [ 18.280447] groups: 08 04
      35. [ 18.280449] domain 1: span 0f
      36. [ 18.280450] groups: 0c 03
      37. [ 18.280691] net_namespace: 64 bytes
      38. [ 18.280698] Booting paravirtualized kernel on bare hardware
      39. [ 18.281035] Time: 0:11:54 Date: 03/29/08
      40. [ 18.281072] NET: Registered protocol family 16
      41. [ 18.281195] EISA bus registered
      42. [ 18.281198] ACPI: bus type pci registered
      43. [ 18.287518] PCI: PCI BIOS revision 2.10 entry at 0xfbbe6, last bus=4
      44. [ 18.287519] PCI: Using configuration type 1
      45. [ 18.287521] Setting up standard PCI resources
      46. [ 18.301375] ACPI: EC: Look up EC in DSDT
      47. [ 18.354221] ACPI: System BIOS is requesting _OSI(Linux)
      48. [ 18.354223] ACPI: If "acpi_osi=Linux" works better,
      49. [ 18.354223] Please send dmidecode to linux-acpi@vger.kernel.org
      50. [ 18.388832] ACPI: Interpreter enabled
      51. [ 18.388834] ACPI: (supports S0 S1 S3 S4 S5)
      52. [ 18.388849] ACPI: Using IOAPIC for interrupt routing
      53. [ 18.516054] ACPI: PCI Root Bridge [PCI0] (0000:00)
      54. [ 18.517237] PCI: Transparent bridge - 0000:00:1e.0
      55. [ 18.517259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
      56. [ 18.517972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
      57. [ 18.518595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
      58. [ 18.519094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
      59. [ 20.298741] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
      60. [ 20.299490] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
      61. [ 20.300238] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
      62. [ 20.300968] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
      63. [ 20.301720] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
      64. [ 20.302454] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
      65. [ 20.303198] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
      66. [ 20.303948] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
      67. [ 20.304327] Linux Plug and Play Support v0.97 (c) Adam Belay
      68. [ 20.304346] pnp: PnP ACPI init
      69. [ 20.304351] ACPI: bus type pnp registered
      70. [ 20.345290] pnp: PnP ACPI: found 7 devices
      71. [ 20.345291] ACPI: ACPI bus type pnp unregistered
      72. [ 20.345293] PnPBIOS: Disabled by ACPI PNP
      73. [ 20.345400] SCSI subsystem initialized
      74. [ 20.345459] libata version 3.00 loaded.
      75. [ 20.345570] PCI: Using ACPI for IRQ routing
      76. [ 20.345572] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
      77. [ 20.388650] NET: Registered protocol family 8
      78. [ 20.388652] NET: Registered protocol family 20
      79. [ 20.388681] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
      80. [ 20.388686] hpet0: 4 64-bit timers, 14318180 Hz
      81. [ 20.392647] Time: tsc clocksource has been installed.
      82. [ 20.392654] Switched to high resolution mode on CPU 0
      83. [ 20.392720] Switched to high resolution mode on CPU 1
      84. [ 20.395579] Switched to high resolution mode on CPU 2
      85. [ 20.395619] Switched to high resolution mode on CPU 3
      86. [ 20.408513] system 00:01: ioport range 0x800-0x85f has been reserved
      87. [ 20.408516] system 00:01: ioport range 0xc00-0xc7f has been reserved
      88. [ 20.408518] system 00:01: ioport range 0x860-0x8ff has been reserved
      89. [ 20.438805] PCI: Bridge: 0000:00:01.0
      90. [ 20.438807] IO window: d000-dfff
      91. [ 20.438810] MEM window: f8000000-fbefffff
      92. [ 20.438812] PREFETCH window: d0000000-dfffffff
      93. [ 20.438814] PCI: Bridge: 0000:00:06.0
      94. [ 20.438815] IO window: disabled.
      95. [ 20.438817] MEM window: disabled.
      96. [ 20.438819] PREFETCH window: disabled.
      97. [ 20.438821] PCI: Bridge: 0000:00:1c.0
      98. [ 20.438822] IO window: disabled.
      99. [ 20.438825] MEM window: f7f00000-f7ffffff
      100. [ 20.438828] PREFETCH window: disabled.
      101. [ 20.438831] PCI: Bridge: 0000:00:1e.0
      102. [ 20.438833] IO window: c000-cfff
      103. [ 20.438837] MEM window: f0000000-f7efffff
      104. [ 20.438839] PREFETCH window: disabled.
      105. [ 20.438850] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
      106. [ 20.438854] PCI: Setting latency timer of device 0000:00:01.0 to 64
      107. [ 20.438859] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
      108. [ 20.438862] PCI: Setting latency timer of device 0000:00:06.0 to 64
      109. [ 20.438875] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
      110. [ 20.438879] PCI: Setting latency timer of device 0000:00:1c.0 to 64
      111. [ 20.438886] PCI: Setting latency timer of device 0000:00:1e.0 to 64
      112. [ 20.438894] NET: Registered protocol family 2
      113. [ 20.476404] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
      114. [ 20.476596] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
      115. [ 20.476882] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
      116. [ 20.477032] TCP: Hash tables configured (established 131072 bind 65536)
      117. [ 20.477034] TCP reno registered
      118. [ 20.488466] checking if image is initramfs... it is
      119. [ 20.838908] Freeing initrd memory: 5923k freed
      120. [ 20.839024] Simple Boot Flag at 0x7a set to 0x1
      121. [ 20.840009] audit: initializing netlink socket (disabled)
      122. [ 20.840021] audit(1206749516.297:1): initialized
      123. [ 20.840261] highmem bounce pool size: 64 pages
      124. [ 20.842460] VFS: Disk quotas dquot_6.5.1
      125. [ 20.842534] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
      126. [ 20.842999] AppArmor: Unable to register AppArmor
      127. [ 20.843031] io scheduler noop registered
      128. [ 20.843032] io scheduler anticipatory registered
      129. [ 20.843033] io scheduler deadline registered
      130. [ 20.843042] io scheduler cfq registered (default)
      131. [ 20.843165] Boot video device is 0000:01:00.0
      132. [ 20.843264] PCI: Setting latency timer of device 0000:00:01.0 to 64
      133. [ 20.843300] assign_interrupt_mode Found MSI capability
      134. [ 20.843321] Allocate Port Service[0000:00:01.0:pcie00]
      135. [ 20.843403] PCI: Setting latency timer of device 0000:00:06.0 to 64
      136. [ 20.843436] assign_interrupt_mode Found MSI capability
      137. [ 20.843461] Allocate Port Service[0000:00:06.0:pcie00]
      138. [ 20.843537] PCI: Setting latency timer of device 0000:00:1c.0 to 64
      139. [ 20.843575] assign_interrupt_mode Found MSI capability
      140. [ 20.843606] Allocate Port Service[0000:00:1c.0:pcie00]
      141. [ 20.843641] Allocate Port Service[0000:00:1c.0:pcie02]
      142. [ 20.843875] vesafb: framebuffer at 0xf9000000, mapped to 0xf8880000, using 3072k, total 14336k
      143. [ 20.843878] vesafb: mode is 1024x768x16, linelength=2048, pages=1
      144. [ 20.843880] vesafb: protected mode interface info at c000:aad0
      145. [ 20.843882] vesafb: pmi: set display start = c00cab33, set palette = c00cab8e
      146. [ 20.843884] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
      147. [ 20.843895] vesafb: scrolling: redraw
      148. [ 20.843897] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
      149. [ 20.856238] Console: switching to colour frame buffer device 128x48
      150. [ 20.868413] fb0: VESA VGA frame buffer device
      151. [ 20.868478] isapnp: Scanning for PnP cards...
      Alles anzeigen
      Nothing moves you like a Citroen.

    • Quellcode

      1. [ 21.177361] isapnp: No Plug & Play device found
      2. [ 21.204467] Real Time Clock Driver v1.12ac
      3. [ 21.204763] hpet_resources: 0xfed00000 is busy
      4. [ 21.204779] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
      5. [ 21.205988] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
      6. [ 21.206054] input: Macintosh mouse button emulation as /devices/virtual/input/input0
      7. [ 21.206290] ata_piix 0000:00:1f.2: version 2.12
      8. [ 21.206295] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
      9. [ 21.206314] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 17
      10. [ 21.206340] PCI: Setting latency timer of device 0000:00:1f.2 to 64
      11. [ 21.206387] scsi0 : ata_piix
      12. [ 21.206452] scsi1 : ata_piix
      13. [ 21.206499] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 17
      14. [ 21.206502] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 17
      15. [ 21.569246] ata1.00: ATA-7: ST3320620AS, 3.ADG, max UDMA/133
      16. [ 21.569248] ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32)
      17. [ 21.569274] ata1.01: ATAPI: TSSTcorpDVD-ROM TS-H353B, D200, max UDMA/33
      18. [ 21.635779] ata1.00: configured for UDMA/133
      19. [ 21.806212] ata1.01: configured for UDMA/33
      20. [ 22.161107] ata2.00: ATA-7: ST3320620AS, 3.ADG, max UDMA/133
      21. [ 22.161111] ata2.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32)
      22. [ 22.161134] ata2.01: ATAPI: Optiarc DVD+/-RW AD-5170S, 101B, max UDMA/66
      23. [ 22.227643] ata2.00: configured for UDMA/133
      24. [ 22.397163] ata2.01: configured for UDMA/66
      25. [ 22.397242] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AD PQ: 0 ANSI: 5
      26. [ 22.397359] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
      27. [ 22.397369] sd 0:0:0:0: [sda] Write Protect is off
      28. [ 22.397371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
      29. [ 22.397386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
      30. [ 22.397425] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
      31. [ 22.397434] sd 0:0:0:0: [sda] Write Protect is off
      32. [ 22.397436] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
      33. [ 22.397451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
      34. [ 22.397453] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
      35. [ 22.472084] sd 0:0:0:0: [sda] Attached SCSI disk
      36. [ 22.473246] scsi 0:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-H353B D200 PQ: 0 ANSI: 5
      37. [ 22.479612] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
      38. [ 22.479615] Uniform CD-ROM driver Revision: 3.20
      39. [ 22.479692] sr 0:0:1:0: Attached scsi CD-ROM sr0
      40. [ 22.479802] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AD PQ: 0 ANSI: 5
      41. [ 22.479905] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
      42. [ 22.479913] sd 1:0:0:0: [sdb] Write Protect is off
      43. [ 22.479915] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
      44. [ 22.479929] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
      45. [ 22.479957] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
      46. [ 22.479965] sd 1:0:0:0: [sdb] Write Protect is off
      47. [ 22.479966] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
      48. [ 22.479980] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
      49. [ 22.479982] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
      50. [ 22.561773] sd 1:0:0:0: [sdb] Attached SCSI disk
      51. [ 22.562687] scsi 1:0:1:0: CD-ROM Optiarc DVD+-RW AD-5170S 101B PQ: 0 ANSI: 5
      52. [ 22.568044] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
      53. [ 22.568103] sr 1:0:1:0: Attached scsi CD-ROM sr1
      54. [ 22.568153] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
      55. [ 22.720407] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 17
      56. [ 22.720432] PCI: Setting latency timer of device 0000:00:1f.5 to 64
      57. [ 22.720466] scsi2 : ata_piix
      58. [ 22.720534] scsi3 : ata_piix
      59. [ 22.720589] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 17
      60. [ 22.720590] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 17
      61. [ 23.712877] scsi4 : pata_legacy
      62. [ 23.712923] ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
      63. [ 23.866511] scsi5 : pata_legacy
      64. [ 23.866557] ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
      65. [ 24.022276] PNP: No PS/2 controller found. Probing ports directly.
      66. [ 24.024826] serio: i8042 KBD port at 0x60,0x64 irq 1
      67. [ 24.024830] serio: i8042 AUX port at 0x60,0x64 irq 12
      68. [ 24.046623] mice: PS/2 mouse device common for all mice
      69. [ 24.046752] EISA: Probing bus 0 at eisa.0
      70. [ 24.046775] EISA: Detected 0 cards.
      71. [ 24.046778] cpuidle: using governor ladder
      72. [ 24.046779] cpuidle: using governor menu
      73. [ 24.046842] TCP cubic registered
      74. [ 24.046849] NET: Registered protocol family 1
      75. [ 24.046877] Using IPI No-Shortcut mode
      76. [ 24.046991] Magic number: 0:772:153
      77. [ 24.047026] hash matches device ttyp7
      78. [ 24.047246] Freeing unused kernel memory: 380k freed
      79. [ 24.280468] usbcore: registered new interface driver usbfs
      80. [ 24.280487] usbcore: registered new interface driver hub
      81. [ 24.290730] usbcore: registered new device driver usb
      82. [ 24.305802] USB Universal Host Controller Interface driver v3.0
      83. [ 24.305852] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
      84. [ 24.305861] PCI: Setting latency timer of device 0000:00:1a.0 to 64
      85. [ 24.305864] uhci_hcd 0000:00:1a.0: UHCI Host Controller
      86. [ 24.306069] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
      87. [ 24.306098] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
      88. [ 24.306192] usb usb1: configuration #1 chosen from 1 choice
      89. [ 24.306209] hub 1-0:1.0: USB hub found
      90. [ 24.306212] hub 1-0:1.0: 2 ports detected
      91. [ 24.410496] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 18
      92. [ 24.410505] PCI: Setting latency timer of device 0000:00:1a.1 to 64
      93. [ 24.410509] uhci_hcd 0000:00:1a.1: UHCI Host Controller
      94. [ 24.410526] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
      95. [ 24.410549] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ff00
      96. [ 24.410624] usb usb2: configuration #1 chosen from 1 choice
      97. [ 24.410640] hub 2-0:1.0: USB hub found
      98. [ 24.410644] hub 2-0:1.0: 2 ports detected
      99. [ 24.514308] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 22 (level, low) -> IRQ 19
      100. [ 24.514316] PCI: Setting latency timer of device 0000:00:1a.2 to 64
      101. [ 24.514320] uhci_hcd 0000:00:1a.2: UHCI Host Controller
      102. [ 24.514336] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
      103. [ 24.514358] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ecc0
      104. [ 24.514434] usb usb3: configuration #1 chosen from 1 choice
      105. [ 24.514450] hub 3-0:1.0: USB hub found
      106. [ 24.514453] hub 3-0:1.0: 2 ports detected
      107. [ 24.618125] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
      108. [ 24.618133] PCI: Setting latency timer of device 0000:00:1d.0 to 64
      109. [ 24.618137] uhci_hcd 0000:00:1d.0: UHCI Host Controller
      110. [ 24.618154] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
      111. [ 24.618177] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000ff80
      112. [ 24.618252] usb usb4: configuration #1 chosen from 1 choice
      113. [ 24.618269] hub 4-0:1.0: USB hub found
      114. [ 24.618272] hub 4-0:1.0: 2 ports detected
      115. [ 24.652977] usb 1-1: new full speed USB device using uhci_hcd and address 2
      116. [ 24.722429] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
      117. [ 24.722438] PCI: Setting latency timer of device 0000:00:1d.1 to 64
      118. [ 24.722443] uhci_hcd 0000:00:1d.1: UHCI Host Controller
      119. [ 24.722466] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
      120. [ 24.722488] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
      121. [ 24.722584] usb usb5: configuration #1 chosen from 1 choice
      122. [ 24.722609] hub 5-0:1.0: USB hub found
      123. [ 24.722613] hub 5-0:1.0: 2 ports detected
      124. [ 24.823326] usb 1-1: configuration #1 chosen from 1 choice
      125. [ 24.824740] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
      126. [ 24.824747] PCI: Setting latency timer of device 0000:00:1d.2 to 64
      127. [ 24.824752] uhci_hcd 0000:00:1d.2: UHCI Host Controller
      128. [ 24.824772] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
      129. [ 24.824795] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40
      130. [ 24.824888] usb usb6: configuration #1 chosen from 1 choice
      131. [ 24.824906] hub 6-0:1.0: USB hub found
      132. [ 24.824909] hub 6-0:1.0: 2 ports detected
      133. [ 24.829252] hub 1-1:1.0: USB hub found
      134. [ 24.830224] hub 1-1:1.0: 3 ports detected
      135. [ 24.928593] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 19
      136. [ 24.928603] PCI: Setting latency timer of device 0000:00:1a.7 to 64
      137. [ 24.928606] ehci_hcd 0000:00:1a.7: EHCI Host Controller
      138. [ 24.928629] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
      139. [ 24.932529] ehci_hcd 0000:00:1a.7: debug port 1
      140. [ 24.932534] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
      141. [ 24.932537] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfbfdac00
      142. [ 24.944469] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
      143. [ 24.944571] usb usb7: configuration #1 chosen from 1 choice
      144. [ 24.944595] hub 7-0:1.0: USB hub found
      145. [ 24.944600] hub 7-0:1.0: 6 ports detected
      Alles anzeigen
      Nothing moves you like a Citroen.

    • Quellcode

      1. [ 25.048399] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
      2. [ 25.048407] PCI: Setting latency timer of device 0000:00:1d.7 to 64
      3. [ 25.048410] ehci_hcd 0000:00:1d.7: EHCI Host Controller
      4. [ 25.048431] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
      5. [ 25.052320] ehci_hcd 0000:00:1d.7: debug port 1
      6. [ 25.052324] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
      7. [ 25.052328] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xff980800
      8. [ 25.064265] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
      9. [ 25.064353] usb usb8: configuration #1 chosen from 1 choice
      10. [ 25.064376] hub 8-0:1.0: USB hub found
      11. [ 25.064381] hub 8-0:1.0: 6 ports detected
      12. [ 25.168158] ACPI: PCI Interrupt 0000:04:0a.0[A] -> GSI 18 (level, low) -> IRQ 21
      13. [ 25.217780] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f7ef7800-f7ef7fff] Max Packet=[2048] IR/IT contexts=[4/8]
      14. [ 25.363735] device-mapper: uevent: version 1.0.3
      15. [ 25.363758] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
      16. [ 25.372238] device-mapper: dm-raid45: initialized v0.2426
      17. [ 25.735052] hub 1-1:1.0: activate --> -19
      18. [ 26.453782] usb 7-6: new high speed USB device using ehci_hcd and address 4
      19. [ 26.485844] ieee1394: Host added: ID:BUS[0-00:1023] GUID[8000000a651df0bf]
      20. [ 26.588691] usb 7-6: configuration #128 chosen from 1 choice
      21. [ 26.596702] usb 1-1: USB disconnect, address 2
      22. [ 26.833108] usb 1-1: new full speed USB device using uhci_hcd and address 3
      23. [ 27.003539] usb 1-1: configuration #1 chosen from 1 choice
      24. [ 27.009472] hub 1-1:1.0: USB hub found
      25. [ 27.010454] hub 1-1:1.0: 3 ports detected
      26. [ 27.356192] usb 1-2: new full speed USB device using uhci_hcd and address 4
      27. [ 27.546612] usb 1-2: configuration #1 chosen from 1 choice
      28. [ 27.571063] md: linear personality registered for level -1
      29. [ 27.573701] md: multipath personality registered for level -4
      30. [ 27.576076] md: raid0 personality registered for level 0
      31. [ 27.579019] md: raid1 personality registered for level 1
      32. [ 27.581266] xor: automatically using best checksumming function: pIII_sse
      33. [ 27.599734] pIII_sse : 8759.000 MB/sec
      34. [ 27.599736] xor: using function: pIII_sse (8759.000 MB/sec)
      35. [ 27.600349] async_tx: api initialized (async)
      36. [ 27.667632] raid6: int32x1 946 MB/s
      37. [ 27.735533] raid6: int32x2 944 MB/s
      38. [ 27.803445] raid6: int32x4 803 MB/s
      39. [ 27.871276] raid6: int32x8 697 MB/s
      40. [ 27.939143] raid6: mmxx1 3071 MB/s
      41. [ 28.007027] raid6: mmxx2 3557 MB/s
      42. [ 28.031995] usb 8-2: new high speed USB device using ehci_hcd and address 3
      43. [ 28.074897] raid6: sse1x1 2078 MB/s
      44. [ 28.142781] raid6: sse1x2 2723 MB/s
      45. [ 28.210655] raid6: sse2x1 3827 MB/s
      46. [ 28.222967] usb 8-2: configuration #1 chosen from 1 choice
      47. [ 28.278531] raid6: sse2x2 4615 MB/s
      48. [ 28.278533] raid6: using algorithm sse2x2 (4615 MB/s)
      49. [ 28.278535] md: raid6 personality registered for level 6
      50. [ 28.278536] md: raid5 personality registered for level 5
      51. [ 28.278538] md: raid4 personality registered for level 4
      52. [ 28.292004] md: raid10 personality registered for level 10
      53. [ 28.691548] usb 1-1.1: new full speed USB device using uhci_hcd and address 5
      54. [ 28.787956] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
      55. [ 28.787962] ReiserFS: sda5: using ordered data mode
      56. [ 28.792809] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
      57. [ 28.793026] ReiserFS: sda5: checking transaction log (sda5)
      58. [ 28.828405] usb 1-1.1: configuration #1 chosen from 1 choice
      59. [ 28.829946] ReiserFS: sda5: Using r5 hash to sort names
      60. [ 28.839313] usbcore: registered new interface driver hiddev
      61. [ 28.844088] usbcore: registered new interface driver libusual
      62. [ 28.848172] Initializing USB Mass Storage driver...
      63. [ 29.077164] usb 4-1: new full speed USB device using uhci_hcd and address 2
      64. [ 29.256001] usb 4-1: configuration #1 chosen from 1 choice
      65. [ 29.258936] hub 4-1:1.0: USB hub found
      66. [ 29.260905] hub 4-1:1.0: 3 ports detected
      67. [ 29.609699] usb 6-1: new full speed USB device using uhci_hcd and address 2
      68. [ 29.780567] usb 6-1: configuration #1 chosen from 1 choice
      69. [ 29.788707] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input1
      70. [ 29.800379] input,hidraw0: USB HID v1.11 Mouse [Logitech G9 Laser Mouse] on usb-0000:00:1a.0-2
      71. [ 29.808729] input: Logitech G9 Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.1/input/input2
      72. [ 29.824350] input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech G9 Laser Mouse] on usb-0000:00:1a.0-2
      73. [ 29.824417] scsi6 : SCSI emulation for USB Mass Storage devices
      74. [ 29.824461] usb-storage: device found at 3
      75. [ 29.824463] usb-storage: waiting for device to settle before scanning
      76. [ 29.826794] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
      77. [ 29.843783] input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.1
      78. [ 29.849608] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4
      79. [ 29.865265] input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.1
      80. [ 30.005614] usb 4-1.1: new full speed USB device using uhci_hcd and address 3
      81. [ 30.151456] usb 4-1.1: configuration #1 chosen from 1 choice
      82. [ 30.364996] usb 4-1.2: new full speed USB device using uhci_hcd and address 4
      83. [ 30.515813] usb 4-1.2: configuration #1 chosen from 1 choice
      84. [ 30.728361] usb 4-1.3: new full speed USB device using uhci_hcd and address 5
      85. [ 30.880180] usb 4-1.3: configuration #1 chosen from 1 choice
      86. [ 30.892138] input: Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input5
      87. [ 30.905841] input: PC Speaker as /devices/platform/pcspkr/input/input6
      88. [ 30.931762] input,hidraw4: USB HID v1.11 Keyboard [Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.2
      Alles anzeigen
      Nothing moves you like a Citroen.

    • Quellcode

      1. [ 31.105694] input: Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input7
      2. [ 31.169641] input,hiddev97,hidraw5: USB HID v1.11 Mouse [Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.3
      3. [ 31.169663] usbcore: registered new interface driver usbhid
      4. [ 31.169666] usbcore: registered new interface driver usb-storage
      5. [ 31.169668] /tmp/buildd/linux-2.6.24/debian/build/custom-source-kanotix/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
      6. [ 31.169671] USB Mass Storage support registered.
      7. [ 31.187258] iTCO_vendor_support: vendor-support=0
      8. [ 31.391240] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
      9. [ 31.391312] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
      10. [ 31.391346] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
      11. [ 31.414326] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
      12. [ 31.414329] e1000e: Copyright (c) 1999-2007 Intel Corporation.
      13. [ 31.414362] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 22
      14. [ 31.414370] PCI: Setting latency timer of device 0000:00:19.0 to 64
      15. [ 31.423941] sd 0:0:0:0: Attached scsi generic sg0 type 0
      16. [ 31.423956] sr 0:0:1:0: Attached scsi generic sg1 type 5
      17. [ 31.423970] sd 1:0:0:0: Attached scsi generic sg2 type 0
      18. [ 31.423984] sr 1:0:1:0: Attached scsi generic sg3 type 5
      19. [ 31.488518] Bluetooth: Core ver 2.11
      20. [ 31.488557] NET: Registered protocol family 31
      21. [ 31.488559] Bluetooth: HCI device and connection manager initialized
      22. [ 31.488561] Bluetooth: HCI socket layer initialized
      23. [ 31.512153] input: Power Button (FF) as /devices/virtual/input/input8
      24. [ 31.532024] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:09:26:43:82
      25. [ 31.532027] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
      26. [ 31.532050] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: 1031ff-0ff
      27. [ 31.581885] Bluetooth: HCI USB driver ver 2.9
      28. [ 31.584030] usbcore: registered new interface driver hci_usb
      29. [ 31.653083] ACPI: Power Button (FF) [PWRF]
      30. [ 31.653130] input: Power Button (CM) as /devices/virtual/input/input9
      31. [ 31.659942] Linux video capture interface: v2.00
      32. [ 31.700996] ACPI: Power Button (CM) [VBTN]
      33. [ 31.751902] saa7130/34: v4l2 driver version 0.2.14 loaded
      34. [ 31.751954] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 17 (level, low) -> IRQ 18
      35. [ 31.751960] saa7134[0]: found at 0000:04:05.0, rev: 1, irq: 18, latency: 64, mmio: 0xf7ef7400
      36. [ 31.751965] saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy 400 TV [card=8,autodetected]
      37. [ 31.751971] saa7134[0]: board init: gpio is 50000
      38. [ 31.752020] input: saa7134 IR (Terratec Cinergy 40 as /devices/pci0000:00/0000:00:1e.0/0000:04:05.0/input/input10
      39. [ 31.839829] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
      40. [ 31.839844] PCI: Setting latency timer of device 0000:00:1b.0 to 64
      41. [ 31.940073] saa7134[0]: i2c eeprom 00: 3b 15 42 11 10 28 ff ff ff ff ff ff ff ff ff ff
      42. [ 31.940080] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      43. [ 31.940085] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      44. [ 31.940090] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      45. [ 31.940096] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      46. [ 31.940101] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      47. [ 31.940106] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      48. [ 31.940111] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
      49. [ 31.983983] All bytes are equal. It is not a TEA5767
      50. [ 31.983986] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
      51. [ 31.983999] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
      52. [ 31.984001] tuner 0-0060: type set to Philips PAL_BG (FI1
      53. [ 31.984003] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
      54. [ 31.984004] tuner 0-0060: type set to Philips PAL_BG (FI1
      55. [ 31.986613] saa7134[0]: registered device video0 [v4l2]
      56. [ 31.986626] saa7134[0]: registered device vbi0
      57. [ 32.819974] Bluetooth: L2CAP ver 2.9
      58. [ 32.819976] Bluetooth: L2CAP socket layer initialized
      59. [ 32.836740] Bluetooth: RFCOMM socket layer initialized
      60. [ 32.836751] Bluetooth: RFCOMM TTY layer initialized
      61. [ 32.836752] Bluetooth: RFCOMM ver 1.8
      62. [ 33.337382] Adding 6144820k swap on /dev/sda6. Priority:-1 extents:1 across:6144820k
      63. [ 34.822625] usb-storage: device scan complete
      64. [ 34.826869] scsi 6:0:0:0: Direct-Access DELL USB HS-CF Card 7.08 PQ: 0 ANSI: 0
      65. [ 34.830606] scsi 6:0:0:1: Direct-Access DELL USB HS-xD/SM 7.08 PQ: 0 ANSI: 0
      66. [ 34.834226] scsi 6:0:0:2: Direct-Access DELL USB HS-MS Card 7.08 PQ: 0 ANSI: 0
      67. [ 34.837342] scsi 6:0:0:3: Direct-Access DELL USB HS-SD Card 7.08 PQ: 0 ANSI: 0
      68. [ 34.841609] sd 6:0:0:0: [sdc] Attached SCSI removable disk
      69. [ 34.841637] sd 6:0:0:0: Attached scsi generic sg4 type 0
      70. [ 34.845963] sd 6:0:0:1: [sdd] Attached SCSI removable disk
      71. [ 34.845985] sd 6:0:0:1: Attached scsi generic sg5 type 0
      72. [ 34.850459] sd 6:0:0:2: [sde] Attached SCSI removable disk
      73. [ 34.850486] sd 6:0:0:2: Attached scsi generic sg6 type 0
      74. [ 34.854452] sd 6:0:0:3: [sdf] Attached SCSI removable disk
      75. [ 34.854476] sd 6:0:0:3: Attached scsi generic sg7 type 0
      76. [ 39.409190] fuse init (API version 7.9)
      77. [ 50.131489] ReiserFS: sdb5: found reiserfs format "3.6" with standard journal
      78. [ 50.131494] ReiserFS: sdb5: using ordered data mode
      79. [ 50.157650] ReiserFS: sdb5: journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
      80. [ 50.157822] ReiserFS: sdb5: checking transaction log (sdb5)
      81. [ 50.190966] ReiserFS: sdb5: Using r5 hash to sort names
      82. [ 51.271542] kjournald starting. Commit interval 5 seconds
      83. [ 51.271666] EXT3 FS on sdb8, internal journal
      84. [ 51.271671] EXT3-fs: mounted filesystem with ordered data mode.
      85. [ 58.649795] Intel ISA PCIC probe: not found.
      86. [ 60.363989] capifs: Rev 1.1.2.3
      87. [ 60.586866] No dock devices found.
      88. [ 60.763847] lp: driver loaded but no devices found
      89. [ 60.774097] ppdev: user-space parallel port driver
      90. [ 61.768121] RPC: Registered udp transport module.
      91. [ 61.768125] RPC: Registered tcp transport module.
      92. [ 63.649741] powernow: This module only works with AMD K7 CPUs
      93. [ 66.025747] Linux agpgart interface v0.102
      94. [ 66.071946] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
      95. [ 66.071950] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
      96. [ 66.206396] nvidia: module license 'NVIDIA' taints kernel.
      97. [ 66.457200] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
      98. [ 66.457209] PCI: Setting latency timer of device 0000:01:00.0 to 64
      99. [ 66.457324] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28 PST 2008
      100. [ 68.150898] NET: Registered protocol family 17
      Alles anzeigen
      Nothing moves you like a Citroen.